NSN 5305-00-880-7775 · NIIN 008807775 · FSC 5305
NO DASHES 5305008807775
In Stock
SCREW,MACHINE
Screws
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.094 AND INCHES MAXIMUM 0.125 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.094 AND INCHES MAXIMUM 0.125 |
| ABQZ | INTERNAL DRIVE STYLE | |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| CMLP | THREAD QUANTITY PER INCH | 64 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| AAJD | THREAD CLASS | 2A |
| CYAU | SCREW MATERIAL | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 321 OR STEEL COMP 347 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.130 AND INCHES MAXIMUM 0.149 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.073 |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| PBF1068-51C | 27624 |
| AOL4168-51 | 57472 |
| 9145-51 | 58251 |
| NAS662C1-2 | 80205 |
| FF-S-92 | 81348 |
| 106751-01-51C | 80539 |
| 965813-51C | 82577 |
| E125-51 | 97928 |
| AIC813-01-2 | 06725 |
| E125-51 | 17446 |