NSN 5305-00-891-1721 · NIIN 008911721 · FSC 5305
NO DASHES 5305008911721
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.815 AND INCHES MAXIMUM 0.862 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 46.0 AND ROCKWELL C MAXIMUM 50.0 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| AAJD | THREAD CLASS | 3A |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| AASK | HEAD STYLE | |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1895 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ABQZ | INTERNAL DRIVE STYLE | |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.305 AND INCHES MAXIMUM 0.372 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF ALL TREATMENT RESPONSES -AC S13145 FSC- 76301 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.376 AND INCHES MAXIMUM 0.385 |
Cross-references
14 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 3M263-3-8 | 34087 |
| 66117H3-8 | 50392 |
| 3M263-3-8 | 56540 |
| 3M263-3-8 | 56878 |
| HT195-3-8 | 73197 |
| 3M263-3-8 | 76301 |
| 3M263-3-8 | 8X044 |
| HT8115-3-8 | 92215 |
| HS2623-3Z8 | 97928 |
| HT8115-3-8 | C4293 |
| HT195-3-8 | C4293 |
| HT195-3-8 | L4528 |
| HT195-3-8 | R1120 |
| HS2623-3Z8 | 17446 |