NSN 5305-00-891-1727 · NIIN 008911727 · FSC 5305
NO DASHES 5305008911727
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF ALL TREATMENT RESPONSES -AC S13145 FSC- 76301 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 46.0 AND ROCKWELL C MAXIMUM 50.0 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.441 AND INCHES MAXIMUM 0.508 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.625 AND INCHES MAXIMUM 0.635 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3110 AND INCHES MAXIMUM 0.3120 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASK | HEAD STYLE | |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.389 AND INCHES MAXIMUM 1.436 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.928 AND INCHES MAXIMUM 0.948 |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| ABQZ | INTERNAL DRIVE STYLE |
Cross-references
12 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 66117H5-15 | 50392 |
| 66117H-5-15 | 56878 |
| 3M263-5-15 | 56878 |
| HT195-5-15 | 73197 |
| 3M263-5-15 | 76301 |
| 66117H-5-15 | 80539 |
| HT8115-5-15 | 92215 |
| HS2623-5Z15 | 97928 |
| HT195-5-15 | C4293 |
| HT8115-5-15 | C4293 |
| HT195-5-15 | L4528 |
| HS2623-5Z15 | 17446 |