NSN 5305-00-891-1730 · NIIN 008911730 · FSC 5305
NO DASHES 5305008911730
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF ALL TREATMENT RESPONSES -AC S13145 FSC- 76301 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.371 AND INCHES MAXIMUM 0.438 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 46.0 AND ROCKWELL C MAXIMUM 50.0 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.678 AND INCHES MAXIMUM 0.698 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2797 AND INCHES MAXIMUM 0.2807 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.069 AND INCHES MAXIMUM 1.116 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.497 AND INCHES MAXIMUM 0.507 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AAJD | THREAD CLASS | 3A |
Cross-references
13 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 66117H4-11 | 56878 |
| 66904H4-11 | 56878 |
| ST3M547-4-11 | 56878 |
| HT308-4-11 | 73197 |
| ST3M547-4-11 | 76301 |
| 66904H4-11 | 80539 |
| HT8115-4-11Y | 92215 |
| HS2623-4Z-11Y | 97928 |
| HT308-4-11 | C4293 |
| HT8115-4-11Y | C4293 |
| HT308-4-11 | R1120 |
| HT308-4-11 | L4528 |
| HS2623-4Z-11Y | 17446 |
Supersedes
This item replaces cancelled NIIN 005485046. An older drawing citing one of those numbers resolves here.