NSN 5305-00-900-1829 · NIIN 009001829 · FSC 5305
NO DASHES 5305009001829
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 1,CL 2 |
| MATT | MATERIAL | OVERALL STEEL COMP 4037 OR STEEL COMP 8740 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 43.0 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 82.0 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.428 AND INCHES MAXIMUM 0.448 |
| AASK | HEAD STYLE | |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.301 AND INCHES MAXIMUM 0.321 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.125 AND INCHES MAXIMUM 0.127 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.359 AND INCHES MAXIMUM 0.411 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| FF-S-86E | 31FF0 |
| 16990-3F-7C | 56878 |
| FF-S-86 TYPE IV | 81348 |
| 51480 | 93835 |
| 51480 | D0079 |