NSN 5305-00-905-1650 · NIIN 009051650 · FSC 5305
NO DASHES 5305009051650
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQFM | HARDNESS RATING | OVERALL ROCKWELL B MINIMUM 80.0 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| ABQZ | INTERNAL DRIVE STYLE | |
| ZZZK | SPECIFICATION/STANDARD DATA | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 80205-NAS1352 |
| AASK | HEAD STYLE | |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.093 AND INCHES MAXIMUM 0.095 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.176 AND INCHES MAXIMUM 0.183 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 30000 |
| MATT | MATERIAL | OVERALL STEEL COMP 3130 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.559 AND INCHES MAXIMUM 0.609 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.609 AND INCHES MAXIMUM 0.641 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.112 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.108 AND INCHES MAXIMUM 0.112 |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 46068-0410S | 27914 |
| 20098-94C10 | 56878 |
| NAS13525C04-10 | 80205 |
| NAS1352C04-10 | 80205 |
| FFS86 | 81348 |
| 416863-410 | 96214 |
| 10114662 | A486G |
| B68160 | K0967 |
| Y5-4Y | 00141 |
| 76000115-002 | 04939 |
Supersedes
This item replaces cancelled NIINs 000515826 · 001519313 · 005755128 · 007644644. An older drawing citing one of those numbers resolves here.