NSN 5305-00-905-7328 · NIIN 009057328 · FSC 5305
NO DASHES 5305009057328
In Stock
SCREW,MACHINE
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASA | THREAD LENGTH | INCHES MINIMUM 0.075 AND INCHES MAXIMUM 0.125 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 80.0 AND DEGREES MAXIMUM 82.0 |
| AAJD | THREAD CLASS | 2A |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.094 AND INCHES MAXIMUM 0.125 |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED STD ALL MATERIAL RESPONSES 66 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 55000 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.195 AND INCHES MAXIMUM 0.225 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.038 AND INCHES MAXIMUM 0.047 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.112 |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2 CL 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS35190-219 | 80205 |
| MS35190-219 | 96906 |
| 133354 | 12204 |
Supersedes
This item replaces cancelled NIIN 000133354. An older drawing citing one of those numbers resolves here.