NSN 5305-00-912-4839 · NIIN 009124839 · FSC 5305
NO DASHES 5305009124839
In Stock
SCREW,MACHINE
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.292 AND INCHES MAXIMUM 0.313 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AASK | HEAD STYLE | |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED STD ALL MATERIAL RESPONSES 66 |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| CYBG | HEAD HOLE CONFIGURATION STYLE | |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.046 |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.376 AND INCHES MAXIMUM 0.438 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.438 |
| CYAU | SCREW MATERIAL | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 |
| ASXK | HOLE QUANTITY | 1 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.123 AND INCHES MAXIMUM 0.130 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 347-0117-000 | 57472 |
| 0407-357 | 56232 |
| S8427A10-7 | 59364 |
| MS35276-262 | 80205 |
| 347-0117-000 | 95105 |
| MS35276-262 | 96906 |
| S8427A10-7 | 99193 |
| MS35276-262 | 99193 |
| 361637 | 06848 |
Supersedes
This item replaces cancelled NIINs 000226402 · 004849736 · 008387774 · 009419368 · 010284822 · 011047304 · 012192945. An older drawing citing one of those numbers resolves here.