NSN 5305-00-914-6150 · NIIN 009146150 · FSC 5305
NO DASHES 5305009146150
In Stock
SCREW,MACHINE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CYBG | HEAD HOLE CONFIGURATION STYLE | |
| AASK | HEAD STYLE | |
| CYAU | SCREW MATERIAL | COPPER ALLOY |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.055 AND INCHES MAXIMUM 0.062 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.031 |
| ABQZ | INTERNAL DRIVE STYLE | |
| ASXK | HOLE QUANTITY | 1 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-B-626 OR FED SPEC SINGLE MATERIAL RESPONSE QQ-W-321 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.086 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.152 AND INCHES MAXIMUM 0.188 |
| CMLP | THREAD QUANTITY PER INCH | 56 |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.156 AND INCHES MAXIMUM 0.188 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.124 AND INCHES MAXIMUM 0.140 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 57000 |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS35273-2 | 80205 |
| MIL-S-933 | 81349 |
| AN500B2-3 | 88044 |
| MS35273-2 | 96906 |
| 2413-023034 | J2909 |
| 2413-023034 | S4276 |
| A151-47 | 06275 |
| CPP1903A001B2-3 | 09017 |
Supersedes
This item replaces cancelled NIINs 000191449 · 000582938 · 001456917 · 006380808 · 006602203 · 010376844. An older drawing citing one of those numbers resolves here.