NSN 5305-00-914-8971 · NIIN 009148971 · FSC 5305
NO DASHES 5305009148971
In Stock
SCREW,CAP,HEXAGON HEAD
Screws
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 13 |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE SAE GR 5 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2 CL 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AASK | HEAD STYLE | |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.062 AND INCHES MAXIMUM 1.250 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 120000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 23.0 AND ROCKWELL C MAXIMUM 32.0 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 85000 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.302 AND INCHES MAXIMUM 0.323 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.736 AND INCHES MAXIMUM 0.750 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.094 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.500 |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| MATT | MATERIAL | OVERALL STEEL |
| CRHC | HOLE CONFIGURATION STYLE | |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.190 AND INCHES MAXIMUM 1.250 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| VH12PK | 55921 |
| R384 | 55921 |
| MS51095-413 | 96906 |
Supersedes
This item replaces cancelled NIINs 002978494 · 004187138. An older drawing citing one of those numbers resolves here.