NSN 5305-00-914-9000 · NIIN 009149000 · FSC 5305
NO DASHES 5305009149000
In Stock
SCREW,MACHINE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 26.0 AND ROCKWELL C MAXIMUM 32.0 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.140 AND INCHES MAXIMUM 1.187 |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC ALL TREATMENT RESPONSES QQ--41=,TYE ,CLASS 3 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.122 AND INCHES MAXIMUM 0.133 |
| CYAU | SCREW MATERIAL | STEEL COMP 8630 OR STEEL COMP 4037 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.375 AND INCHES MAXIMUM 0.514 |
| AAJD | THREAD CLASS | 3A |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC 1ST MATERIAL RESPONSE -IL-S-6050 OR ASSN STD 2ND MATERIAL RESPONSE A-S 6300 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.357 AND INCHES MAXIMUM 0.373 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS27039-1-18 | 2N935 |
| NAS221-18 | 80205 |
| MS27039-1-18 | 80205 |
| 5305PL0726482 | 9009H |
| MS27039-1-18 | 96906 |
| MS27039-1-18 | A0126 |
| 10114676 | A486G |
| 2010922 | S4956 |
| 2010922 | 001JK |
| MS27039-1-18 | 0NFB8 |
Supersedes
This item replaces cancelled NIIN 010147470. An older drawing citing one of those numbers resolves here.