NSN 5305-00-917-0993 · NIIN 009170993 · FSC 5305
NO DASHES 5305009170993
In Stock
SCREW,MACHINE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CYAU | SCREW MATERIAL | STEEL COMP 4340 OR STEEL COMP 4140 OR STEEL COMP 8740 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-6049 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 39.0 AND ROCKWELL C MAXIMUM 43.0 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.276 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.423 AND INCHES MAXIMUM 1.470 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES NOMINAL 0.381 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.103 AND INCHES MAXIMUM 0.118 |
| CYBK | SHANK SURFACE FINISH | MICROINCHES 32.0 |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 76823-51B221 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 180000 |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.