NSN 5305-00-925-9675 · NIIN 009259675 · FSC 5305
NO DASHES 5305009259675
In Stock
SCREW,MACHINE
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CYBA | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.306 AND INCHES MAXIMUM 0.322 |
| CYAU | SCREW MATERIAL | STEEL COMP 4037 OR STEEL COMP 8630 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASK | HEAD STYLE | |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.164 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC ALL TREATMENT RESPONSES QQ--416,TYE 2,CLASS 3 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 26.0 AND ROCKWELL C MAXIMUM 32.0 |
| AAJD | THREAD CLASS | 3A |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.579 AND INCHES MAXIMUM 0.596 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.408 AND INCHES MAXIMUM 0.455 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.105 AND INCHES MAXIMUM 0.115 |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS27039-0809 | 80205 |
| 5305PL0142472 | 9009H |
| MS27039-0809 | 96906 |
| 2010750 | FB459 |
| MS27039-0809 | A0126 |
| MS27039-0809 | A0170 |
| 935.63.31.009 | S4080 |
| 2010750 | S4956 |
| 2010750 | 001JK |
| MS27039-0809 | 13499 |
Supersedes
This item replaces cancelled NIINs 002820136 · 005157459. An older drawing citing one of those numbers resolves here.