SCREW,CLOSE TOLERANCE

Name: SCREW,CLOSE TOLERANCE
Brand: Atlas Air Supply
SKU: 5305009291713
Availability: LimitedAvailability

Screws

Technical characteristics

24 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

Technical characteristics from the federal item record
MRC	Requirement	Value
CSYM	SURFACE FINISH	BEARING SURFACE OF HEAD MICROINCHES 32.0
ANEE	GRIP LENGTH	INCHES MINIMUM 0.740 AND INCHES MAXIMUM 0.760
CSYM	SURFACE FINISH	THREADS MICROINCHES 32.0
MATT	MATERIAL	FASTENER STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740
MATT	MATERIAL	LOCKING FEATURE PLASTIC
ZZZK	SPECIFICATION/STANDARD DATA	PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 80205-NAS1164
AAUR	GRIP DIAMETER	INCHES MINIMUM 0.2485 AND INCHES MAXIMUM 0.2495
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	FASTENER FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY2 CL2
CMLP	THREAD QUANTITY PER INCH	28
CQBC	MINIMUM TENSILE STRENGTH	POUNDS PER SQUARE INCH 160000
ABQZ	INTERNAL DRIVE STYLE
AHYM	NOMINAL THREAD DIAMETER	INCHES 0.250
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	INCHES MINIMUM 0.400 AND INCHES MAXIMUM 0.450
AASB	FASTENER LENGTH	INCHES MINIMUM 1.160 AND INCHES MAXIMUM 1.190
AASK	HEAD STYLE
SFTT	SURFACE TREATMENT	FASTENER CADMIUM AND CHROMATE
CQFM	HARDNESS RATING	OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 40.0
CRSQ	COUNTERSINK ANGLE	DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0
AASL	HEAD DIAMETER	INCHES MINIMUM 0.497 AND INCHES MAXIMUM 0.507
AAUM	LOCKING FEATURE	THREADS PATCH OR PELLET OR STRIP
THSD	THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	FASTENER MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-6049

18 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.