NSN 5305-00-934-0118 · NIIN 009340118 · FSC 5305
NO DASHES 5305009340118
In Stock
SCREW,MACHINE
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.112 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.200 AND INCHES MAXIMUM 0.225 |
| AASK | HEAD STYLE | |
| ZZZX | DEPARTURE FROM CITED DESIGNATOR | AS MOD BY MATERIAL AND FINISH |
| ABQZ | INTERNAL DRIVE STYLE | |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 3 AND STYLE 3C |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.183 AND INCHES MAXIMUM 0.272 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.281 AND INCHES MAXIMUM 0.312 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| CYAU | SCREW MATERIAL | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD ALL MATERIAL RESPONSES AISI OR ASSN STD ALL MATERIAL RESPONSES SAE |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| FF-S-92B | 81348 |
| FFS92 | 81348 |
| 418359-222 | 96214 |
| 873-992-010000-1 | 07421 |
Supersedes
This item replaces cancelled NIIN 010630044. An older drawing citing one of those numbers resolves here.