NSN 5305-00-934-9729 · NIIN 009349729 · FSC 5305
NO DASHES 5305009349729
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.297 AND INCHES MAXIMUM 0.327 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.159 AND INCHES MAXIMUM 0.164 |
| CQFM | HARDNESS RATING | FASTENER ROCKWELL C MINIMUM 80.0 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 30000 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| MATT | MATERIAL | LOCKING FEATURE PLASTIC POLYAMIDE NYLON |
| SFTT | SURFACE TREATMENT | FASTENER PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FASTENER ASSN STD SINGLE TREATMENT RESPONSE ST- A380 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 6 |
| AAUM | LOCKING FEATURE | THREADS PATCH |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.138 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.141 AND INCHES MAXIMUM 0.144 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.235 AND INCHES MAXIMUM 0.327 |
| AAJD | THREAD CLASS | 3A |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.262 AND INCHES MAXIMUM 0.270 |
| MATT | MATERIAL | FASTENER STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 OR STEEL COMP XM-7 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 8000 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS21295-9 | 80205 |
| FF-S-86 | 81348 |
| 5305PL0972325 | 9009H |
| MS21295-9 | 96906 |
| 813-5 | 05160 |
Supersedes
This item replaces cancelled NIINs 008347091 · 009145784. An older drawing citing one of those numbers resolves here.