NSN 5305-00-939-0660 · NIIN 009390660 · FSC 5305
NO DASHES 5305009390660
In Stock
SCREW,SHOULDER
Screws
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 140000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 32.0 AND ROCKWELL C MAXIMUM 43.0 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.302 AND INCHES MAXIMUM 0.312 |
| MATT | MATERIAL | OVERALL STEEL COMP 4037 OR STEEL COMP 4137 OR STEEL COMP 4140 OR STEEL COMP 8630 OR STEEL COMP 8740 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| ASDB | WIDTH ACROSS FLATS | INCHES NOMINAL 0.250 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.600 AND INCHES MAXIMUM 1.620 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2 CL 3 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.595 AND INCHES MAXIMUM 0.625 |
| AATN | SHOULDER DIAMETER | FIRST SHOULDER INCHES MINIMUM 0.496 AND INCHES MAXIMUM 0.498 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.729 AND INCHES MAXIMUM 0.750 |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CWYB | SHOULDER SHAPE | FIRST SHOULDER ROUND |
| AATX | SHOULDER LENGTH | FIRST SHOULDER INCHES MINIMUM 0.995 AND INCHES MAXIMUM 1.005 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS51975-29 | 80205 |
| 703-2298071 PIE | 80064 |
| MS51975-29 | 96906 |
| 20087 | 01976 |
| 12Z1160-7 | 10001 |
Supersedes
This item replaces cancelled NIINs 006370310 · 012412652. An older drawing citing one of those numbers resolves here.