NSN 5305-00-939-7063 · NIIN 009397063 · FSC 5305
NO DASHES 5305009397063
In Stock
SCREW,CAP,HEXAGON HEAD
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.750 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.455 AND INCHES MAXIMUM 0.483 |
| AASK | HEAD STYLE | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 1.100 AND INCHES MAXIMUM 1.125 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE SAE TO A-S QQ--416 TY2CL3 |
| CMLP | THREAD QUANTITY PER INCH | 10 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.732 AND INCHES MAXIMUM 1.750 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 3.906 AND INCHES MAXIMUM 4.000 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 120000 |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE SAE GR 5 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 25.0 AND ROCKWELL C MAXIMUM 34.0 |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 701-4711389-22 | 80064 |
| B18.2.1 | 80204 |
| FF-S-85C | 81348 |
| 5305PL0699932 | 9009H |
| 110-0785 | 93408 |
| MS90725-195 | 96906 |
| MS90725 | 96906 |
| ASME-B18.2.1 | 05047 |
Supersedes
This item replaces cancelled NIINs 000429777 · 008742264. An older drawing citing one of those numbers resolves here.