NSN 5305-00-944-8297 · NIIN 009448297 · FSC 5305
NO DASHES 5305009448297
In Stock
SCREW,CAP,HEXAGON HEAD
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.625 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.378 AND INCHES MAXIMUM 0.403 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL B MINIMUM 80.0 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 30000 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 63.0 |
| AASK | HEAD STYLE | |
| AAJD | THREAD CLASS | 2A |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.639 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.406 AND INCHES MAXIMUM 2.500 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.922 AND INCHES MAXIMUM 0.938 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 2 AND STYLE 10 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS35308-466 | 80205 |
| NASM35308 | 80205 |
| FF-S-85 | 81348 |
| MS35308-466 | 96906 |
Supersedes
This item replaces cancelled NIIN 008013627. An older drawing citing one of those numbers resolves here.