NSN 5305-00-951-8653 · NIIN 009518653 · FSC 5305
NO DASHES 5305009518653
In Stock
SCREW,CAP,HEXAGON HEAD
Screws
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.736 AND INCHES MAXIMUM 0.750 |
| CRHC | HOLE CONFIGURATION STYLE | |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CMLP | THREAD QUANTITY PER INCH | 13 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 150000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 32.0 AND ROCKWELL C MAXIMUM 38.0 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.094 |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE SAE GR 8 |
| SFTT | SURFACE TREATMENT | OVERALL PHOSPHATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-16232,TY 2 |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.062 AND INCHES MAXIMUM 1.250 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.250 |
| ASXK | HOLE QUANTITY | 1 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.302 AND INCHES MAXIMUM 0.323 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 120000 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.500 |
| BQDM | HOLE TYPE | DRILLED |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| FF-S-85 TY II ST 10P | 81348 |
| MS51097-113 | 96906 |