NSN 5305-00-957-6265 · NIIN 009576265 · FSC 5305
NO DASHES 5305009576265
In Stock
SCREW,MACHINE
Screws
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CYAU | SCREW MATERIAL | STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1013 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.244 AND INCHES MAXIMUM 0.279 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 60000 |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC ALL TREATMENT RESPONSES QQ-B-416,TY 2,CL3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 80.0 AND DEGREES MAXIMUM 82.0 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 3 AND STYLE 2C |
| ZZZX | DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY MATERIAL |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.074 AND INCHES MAXIMUM 0.167 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.219 AND INCHES MAXIMUM 0.250 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED STD ALL MATERIAL RESPONSES 66 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.138 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
| AASK | HEAD STYLE |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 858554-00 | 32345 |
| 121020 | 3B4M0 |
| 121020 | 57712 |
| 2141 | 73734 |
| MS35190-234 | 80205 |
| FFS92 | 81348 |
| AN505B6-4 | 88044 |
| 4&522H | 97918 |
| MS35190-23 | 96906 |
| MS35190-234 | 96906 |
Supersedes
This item replaces cancelled NIINs 000133416 · 002077492 · 002983143 · 007260989. An older drawing citing one of those numbers resolves here.