NSN 5305-00-957-6269 · NIIN 009576269 · FSC 5305
NO DASHES 5305009576269
In Stock
SCREW,MACHINE
Screws
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 60000 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.333 AND INCHES MAXIMUM 0.362 |
| AAJD | THREAD CLASS | 2A |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE SAE TO A-S QQ--416 TY2CL3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.917 AND INCHES MAXIMUM 1.000 |
| CYAU | SCREW MATERIAL | STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1013 |
| ABQZ | INTERNAL DRIVE STYLE | |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 80.0 AND DEGREES MAXIMUM 82.0 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM OR ZINC |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.000 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 101079 | 2S125 |
| MS35190-275 | 80205 |
| B18.6.3 | 80204 |
| FF-S-92 | 81348 |
| FF-S-92 TY3DE1ST2C | 80244 |
| MS35190-275 | 96906 |
| ASME B18.6.3 | 05047 |
Supersedes
This item replaces cancelled NIINs 000134302 · 000120621. An older drawing citing one of those numbers resolves here.