NSN 5305-00-957-6646 · NIIN 009576646 · FSC 5305
NO DASHES 5305009576646
In Stock
SCREW,MACHINE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABQZ | INTERNAL DRIVE STYLE | |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 3 AND STYLE 2C |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 80.0 AND DEGREES MAXIMUM 82.0 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 55000 |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 3 |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.776 AND INCHES MAXIMUM 1.900 |
| AAJD | THREAD CLASS | 2A |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED STD ALL MATERIAL RESPONSES 66 |
| AASK | HEAD STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.164 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.292 AND INCHES MAXIMUM 0.332 |
| ZZZX | DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY MATERIAL AND TENSILE STRENGTH |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.938 AND INCHES MAXIMUM 2.000 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 18275ADX | 1VN02 |
| 18275 | 73734 |
| NASM35190 | 80205 |
| MS35190-261 | 80205 |
| FFS92 | 81348 |
| MS35190-261 | 96906 |
Supersedes
This item replaces cancelled NIIN 001562813. An older drawing citing one of those numbers resolves here.