NSN 5305-00-957-7811 · NIIN 009577811 · FSC 5305
NO DASHES 5305009577811
In Stock
SCREW,MACHINE
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CYBA | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 60000 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.324 AND INCHES MAXIMUM 0.386 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED STD SINGLE MATERIAL RESPONSE 66 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.333 AND INCHES MAXIMUM 0.385 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.469 AND INCHES MAXIMUM 0.500 |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CYAU | SCREW MATERIAL | STEEL |
| AASK | HEAD STYLE |
Cross-references
13 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 416 785 | 77294 |
| MS24693-S272 | 80205 |
| NASM24693-272 | 80205 |
| 5305PL0142341 | 9009H |
| 203-20967-106 | 94990 |
| MS24693-S272 | 96906 |
| 2018879 | FB459 |
| MS24693-5272 | D9182 |
| MS24693-272 | D9182 |
| 2018879 | S4956 |
| 933.45.16.272 | S4080 |
| 2018879 | 001JK |
| 835135 | 19203 |
Supersedes
This item replaces cancelled NIINs 003379868 · 003373090 · 006380643 · 008445153 · 008935439 · 008816063. An older drawing citing one of those numbers resolves here.