NSN 5305-00-957-7814 · NIIN 009577814 · FSC 5305
NO DASHES 5305009577814
In Stock
SCREW,MACHINE
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.285 AND INCHES MAXIMUM 0.332 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.313 AND INCHES MAXIMUM 0.375 |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CYAU | SCREW MATERIAL | STEEL COMP 1010 |
| AASK | HEAD STYLE | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AAJD | THREAD CLASS | 2A |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.375 |
| ABQZ | INTERNAL DRIVE STYLE | |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 60000 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.164 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED STD SINGLE MATERIAL RESPONSE 66 |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
Cross-references
12 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS24693-S48 | 1Q009 |
| 414 761 | 77294 |
| MS24693-S48 | 80205 |
| 5305PL0979042 | 9009H |
| 5305PL2205775 | 9009H |
| 128C6030DS048 | 97942 |
| 128C603DS048 | 97942 |
| 124C946H10 | 97942 |
| MS24693-S48 | 96906 |
| 10333287 | A486G |
| 4177085-10 | D9182 |
| 933.45.16.138 | S4080 |
Supersedes
This item replaces cancelled NIINs 006259177 · 007618556 · 008787061. An older drawing citing one of those numbers resolves here.