NSN 5305-00-958-1003 · NIIN 009581003 · FSC 5305
NO DASHES 5305009581003
In Stock
SCREW,MACHINE
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 57000 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.164 |
| CYBA | SCREW SURFACE TREATMENT | OXIDE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 80.0 AND DEGREES MAXIMUM 82.0 |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL STD SINGLE TREATMENT RESPONSE -IL-F-495 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.376 AND INCHES MAXIMUM 0.438 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.438 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-B-626 OR FED SPEC SINGLE MATERIAL RESPONSE QQ-W-321 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.292 AND INCHES MAXIMUM 0.332 |
| AAJD | THREAD CLASS | 2A |
| CYAU | SCREW MATERIAL | COPPER ALLOY |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 20265 BLK.OXIDEADX | 1VN02 |
| 41-205 | 1UVT5 |
| 20265 BLK.OXIDE | 73734 |
| MS35198-41 | 80205 |
| MS35198-41 | 96906 |
Supersedes
This item replaces cancelled NIINs 014878912 · 001353048 · 002724100 · 002903232 · 009586074. An older drawing citing one of those numbers resolves here.