NSN 5305-00-958-5455 · NIIN 009585455 · FSC 5305
NO DASHES 5305009585455
In Stock
SCREW,MACHINE
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 55000 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.112 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.000 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED STD ALL MATERIAL RESPONSES 66 |
| AASK | HEAD STYLE | |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 80.0 AND DEGREES MAXIMUM 82.0 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.950 AND INCHES MAXIMUM 1.000 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.195 AND INCHES MAXIMUM 0.225 |
| CYAU | SCREW MATERIAL | STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1013 |
| AAJD | THREAD CLASS | 2A |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 18230ADX | 1VN02 |
| 18230 | 73734 |
| MS35190-229 | 80205 |
| FFS92 | 81348 |
| MS35192-20 | 96906 |
| MS35190-229 | 96906 |
Supersedes
This item replaces cancelled NIINs 002718787 · 006168544 · 006375922 · 008383291 · 009881128. An older drawing citing one of those numbers resolves here.