NSN 5305-00-978-9345 · NIIN 009789345 · FSC 5305
NO DASHES 5305009789345
In Stock
SCREW,MACHINE
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC ALL TREATMENT RESPONSES QQ--416, TY 2 CL 3 |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.176 AND INCHES MAXIMUM 0.183 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.108 AND INCHES MAXIMUM 0.112 |
| CYAU | SCREW MATERIAL | STEEL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.734 AND INCHES MAXIMUM 0.766 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.734 AND INCHES MAXIMUM 0.766 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AASK | HEAD STYLE | |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 45.0 |
| AAJD | THREAD CLASS | 3A |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.093 AND INCHES MAXIMUM 0.095 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.112 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 5305PL0896682 | 9009H |
| ST984508-17 | 94580 |
| MS16997-13 | 96906 |
| MS35457-5 | 96906 |
| 200087-16 | 02145 |
| 858314 | 19203 |
Supersedes
This item replaces cancelled NIINs 002077519 · 008818228 · 009740089. An older drawing citing one of those numbers resolves here.