NSN 5305-00-983-6625 · NIIN 009836625 · FSC 5305
NO DASHES 5305009836625
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.253 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.457 AND INCHES MAXIMUM 0.468 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.306 AND INCHES MAXIMUM 0.312 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.335 AND INCHES MAXIMUM 1.375 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.960 AND INCHES MAXIMUM 2.000 |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 45.0 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 130000 |
| MATT | MATERIAL | OVERALL STEEL |
| AASK | HEAD STYLE | |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2 CL 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AAJD | THREAD CLASS | 3A |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 5305PL0759474 | 9009H |
| MS16997-84 | 96906 |
| MS 16997-84 | D9182 |
| 3176207-A-127 | D9182 |
| NAS1352 | 0U583 |
| 317207-A-127 | 10001 |
Supersedes
This item replaces cancelled NIINs 002742353 · 008363582. An older drawing citing one of those numbers resolves here.