NSN 5305-00-984-3023 · NIIN 009843023 · FSC 5305
NO DASHES 5305009843023
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAJD | THREAD CLASS | 3A |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.438 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.719 AND INCHES MAXIMUM 0.750 |
| AASK | HEAD STYLE | |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2 CL 3 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 45.0 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 130000 |
| MATT | MATERIAL | OVERALL STEEL |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| CMLP | THREAD QUANTITY PER INCH | 14 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.430 AND INCHES MAXIMUM 0.438 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.375 AND INCHES MAXIMUM 0.379 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.642 AND INCHES MAXIMUM 0.656 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 6 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.576 AND INCHES MAXIMUM 0.750 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| NAS1352-7-12P | 80205 |
| FF-S-86 REVISION C | 81348 |
| MS16997-119 | 96906 |
Supersedes
This item replaces cancelled NIIN 002726526. An older drawing citing one of those numbers resolves here.