NSN 5305-00-992-5851 · NIIN 009925851 · FSC 5305
NO DASHES 5305009925851
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.109 AND INCHES MAXIMUM 0.111 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAJD | THREAD CLASS | 3A |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.138 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 30000 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81348-FFS86 OR STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). 96906--S16995-20 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.218 AND INCHES MAXIMUM 0.226 |
| AASA | THREAD LENGTH | INCHES MAXIMUM 0.750 |
| AASB | FASTENER LENGTH | INCHES MAXIMUM 0.750 |
| AASK | HEAD STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 35.0 AND ROCKWELL C MAXIMUM 36.0 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 6 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.134 AND INCHES MAXIMUM 0.138 |
| ABQZ | INTERNAL DRIVE STYLE | |
| MATT | MATERIAL | OVERALL STEEL COMP 304 |
| ZZZW | DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY MATERIAL |
| ZZZX | DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY CONDITION A |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS16995-20 | 80205 |
| MS16995-20 | 96906 |