NSN 5305-00-992-6088 · NIIN 009926088 · FSC 5305
NO DASHES 5305009926088
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 20 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.375 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| MATT | MATERIAL | OVERALL STEEL COMP 304 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81348-FFS86 OR STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). 96906--S16995-52 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL B MINIMUM 80.0 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 30000 |
| ZZZW | DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY MATERIAL |
| ZZZX | DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY CONDITION A |
| AASA | THREAD LENGTH | INCHES MAXIMUM 1.000 |
| AASB | FASTENER LENGTH | INCHES MAXIMUM 1.000 |
| AASK | HEAD STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.244 AND INCHES MAXIMUM 0.250 |
| ABQZ | INTERNAL DRIVE STYLE | |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.188 AND INCHES MAXIMUM 0.190 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 6 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 5305PL0859065 | 9009H |
| MS16995-52 | 96906 |
Supersedes
This item replaces cancelled NIIN 010829510. An older drawing citing one of those numbers resolves here.