NSN 5305-01-004-4999 · NIIN 010044999 · FSC 5305
NO DASHES 5305010044999
In Stock
SCREW,CAP,HEXAGON HEAD
Screws
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.438 AND INCHES MAXIMUM 1.750 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.688 AND INCHES MAXIMUM 1.750 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.455 AND INCHES MAXIMUM 0.483 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 1.100 AND INCHES MAXIMUM 1.125 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.750 |
| CMLP | THREAD QUANTITY PER INCH | 10 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 120000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 25.0 AND ROCKWELL C MAXIMUM 34.0 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 63.0 |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE SAE GR 5 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| SPCL | SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2 CL 2 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL--23199 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 2 AND STYLE 10 AND GRADE 5 |
| ZZZX | DEPARTURE FROM CITED DESIGNATOR | AS MOD BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| E103972 FIND NO 58 | 3X894 |
| E108609 FIND 250 | 3X894 |
| MS90725-186 | 80205 |
| FF-S-85 | 81348 |
| MS90725-186 | 96906 |
Supersedes
This item replaces cancelled NIIN 002181371. An older drawing citing one of those numbers resolves here.