NSN 5305-01-007-1513 · NIIN 010071513 · FSC 5305
NO DASHES 5305010071513
In Stock
SCREW,MACHINE
Screws
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.636 AND INCHES MAXIMUM 0.716 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.720 AND INCHES MAXIMUM 0.750 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.181 AND INCHES MAXIMUM 0.199 |
| AAUM | LOCKING FEATURE | PATCH OR PELLET OR STRIP |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.099 |
| CMLP | THREAD QUANTITY PER INCH | 48 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| FEAT | SPECIAL FEATURES | MATERIAL: STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 302 OR STEEL COMP 303 OVERALL; SURFACE TREATMENT: PASSIVATE OVERALL; MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-763 FED SPEC 2ND MATERIAL MIL-S-7720 MIL SPEC 3RD MATERIAL RESPONSE OR ASTM A582 ASSN STD 4TH MATERIAL RESPONSE OVERALL; HEAD STYLE: FLAT COUNTERSUNK; SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZK | SPECIFICATION/STANDARD DATA | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 80205-NAS662 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| NAS662C3LER12 | 80205 |
| FF-S-92 | 81348 |
| MIL-DTL-18240F | 81349 |