NSN 5305-01-014-4258 · NIIN 010144258 · FSC 5305
NO DASHES 5305010144258
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.466 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.888 AND INCHES MAXIMUM 1.934 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.880 AND INCHES MAXIMUM 0.890 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.4360 AND INCHES MAXIMUM 0.4370 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.106 AND INCHES MAXIMUM 0.111 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.438 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.429 AND INCHES MAXIMUM 1.448 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 1.760 AND INCHES MAXIMUM 1.816 |
| MATT | MATERIAL | OVERALL STEEL |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE TREATMENT RESPONSE -AC S13145,FSC- 76301 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 76301-ST3-562 |
Cross-references
14 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| ST3M562-7D23 | 1V757 |
| 73991H-7D23 | 56878 |
| ST3M562-7D23 | 5X576 |
| HT309-7D23 | 73197 |
| ST3M562-7D23 | 76301 |
| 73991H-7D23 | 80539 |
| HT8177-7D23 | 92215 |
| BM19031-7-23D | 97928 |
| HT309-7D23 | C4293 |
| HT8177-7D23 | C4293 |
| HT309-7D23 | L4528 |
| HT309-7D23 | R1120 |
| HT8177-7D23 | 06950 |
| BM19031-7-23D | 17446 |