NSN 5305-01-015-3356 · NIIN 010153356 · FSC 5305
NO DASHES 5305010153356
In Stock
SCREW,CAP,HEXAGON HEAD
Screws
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.125 AND INCHES MAXIMUM 1.313 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.156 AND INCHES MAXIMUM 2.250 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.272 AND INCHES MAXIMUM 0.291 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.612 AND INCHES MAXIMUM 0.625 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.062 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.438 |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 14 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 150000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 32.0 AND ROCKWELL C MAXIMUM 38.0 |
| CRHC | HOLE CONFIGURATION STYLE | |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE SAE GR 8 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2 CL 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZK | SPECIFICATION/STANDARD DATA | NATIONAL STD/SPEC 05047-AES01C438B25AW9A97 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 2 AND STYLE 10 AND GRADE 8 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| B1821BH044C225D | 80204 |
| FF-S-85 | 81348 |
| MS18154-91 | 96906 |
| ASME-B18.2.1 | 05047 |
| AES01C438B25AW9A97 | 05047 |