NSN 5305-01-015-3364 · NIIN 010153364 · FSC 5305
NO DASHES 5305010153364
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.381 AND INCHES MAXIMUM 0.431 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.891 AND INCHES MAXIMUM 0.921 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.376 AND INCHES MAXIMUM 0.385 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1890 AND INCHES MAXIMUM 0.1895 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
24 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| ST3M454-3L8 | 1VSL7 |
| HT4025L3-8 | 27624 |
| HT4025L3-8 | 56878 |
| HT4Q25L3-8 | 56878 |
| ST3M454-3L8 | 58998 |
| 11905-3L8 | 59563 |
| WC4025L-3-8 | 60516 |
| HT4025L3-8 | 73197 |
| ST3M454-3L8 | 76301 |
| HT4025L3-8 | 80539 |
| HT4Q25L3-8 | 80539 |
| CHT4025-3-8 | 80539 |
| HT4025L3-8 | 92215 |
| CHT4025-3-8 | 92215 |
| HT4025L3-8 | 97928 |
| HT4025L3-8 | L4528 |
| HT4025L3-8 | K5673 |
| ST3M454-3L8 | 007R1 |
| HT4025L3-8 | 06950 |
| ST3M454-3L8 | 06710 |
| HT4025L3-8 | 06725 |
| ST3M454-3L8 | 0ZC92 |
| CHT4025-3-8 | 17419 |
| HT4025L3-8 | 17446 |