NSN 5305-01-019-0837 · NIIN 010190837 · FSC 5305
NO DASHES 5305010190837
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.397 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.570 AND INCHES MAXIMUM 1.600 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.497 AND INCHES MAXIMUM 0.507 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2495 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.081 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.178 AND INCHES MAXIMUM 1.198 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 1.469 AND INCHES MAXIMUM 1.479 |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| HT4036-4D19 | 56878 |
| HT4036-4D19 | 73197 |
| ST3M680-4D19 | 76301 |
| HT4036-4D19 | 80539 |
| HT4036-4D19 | 92215 |
| HT4036-4D19 | 97928 |
| HT4036-4D19 | C4293 |
| HT4036-4D19 | L4528 |
| HT4036-4D19 | R1120 |
| HT4036-4D19 | 17446 |