NSN 5305-01-034-6626 · NIIN 010346626 · FSC 5305
NO DASHES 5305010346626
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.428 AND INCHES MAXIMUM 0.478 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.376 AND INCHES MAXIMUM 1.406 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.612 AND INCHES MAXIMUM 0.672 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.4365 AND INCHES MAXIMUM 0.4370 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.106 AND INCHES MAXIMUM 0.111 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.438 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.928 AND INCHES MAXIMUM 0.948 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 0.120 AND INCHES MAXIMUM 0.130 |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE MATERIAL RESPONSE 23-112,-CDONNEL DOUGLAS COR |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| HT4048-7D-15 | 1VSL7 |
| HT4048-7D-15 | 56878 |
| 11929-7D15 | 59563 |
| HT4048-7D-15 | 73197 |
| ST3M713-7D15 | 76301 |
| HT4048-7D-15 | 80539 |
| HT4048-7D-15 | 92215 |
| AT4048-7D-15 | 97928 |
| HT4048-7D-15 | L4528 |
| HT4048-7D-15 | 06950 |
| AT4048-7D-15 | 17446 |