SCREW,CLOSE TOLERANCE

Name: SCREW,CLOSE TOLERANCE
Brand: Atlas Air Supply
SKU: 5305010437716
Availability: LimitedAvailability

Screws

Technical characteristics

24 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

Technical characteristics from the federal item record
MRC	Requirement	Value
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	INCHES MINIMUM 0.378 AND INCHES MAXIMUM 0.428
AASB	FASTENER LENGTH	INCHES MINIMUM 0.638 AND INCHES MAXIMUM 0.668
AASK	HEAD STYLE
AASL	HEAD DIAMETER	INCHES MINIMUM 0.350 AND INCHES MAXIMUM 0.398
AAUR	GRIP DIAMETER	INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2495
AAWB	SHANK UNTHREADED HOLE DIAMETER	FIRST HOLE INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.086
ABQZ	INTERNAL DRIVE STYLE
AHYM	NOMINAL THREAD DIAMETER	INCHES 0.250
ANEE	GRIP LENGTH	INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260
CMLP	THREAD QUANTITY PER INCH	28
CQBC	MINIMUM TENSILE STRENGTH	POUNDS PER SQUARE INCH 160000
CQFM	HARDNESS RATING	OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 40.0
CRSQ	COUNTERSINK ANGLE	DEGREES NOMINAL 100.0
CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	FIRST HOLE INCHES MINIMUM 0.090 AND INCHES MAXIMUM 0.110
CSYM	SURFACE FINISH	THREADS MICROINCHES 32.0
CSYM	SURFACE FINISH	GRIP MICROINCHES 32.0
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	NAVY SPECIAL PROJECT
MATT	MATERIAL	OVERALL IRON ALLOY 660
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5732
SFTT	SURFACE TREATMENT	OVERALL PASSIVATE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35
THSD	THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
ZZZK	SPECIFICATION/STANDARD DATA	MANUFACTURERS STANDARD 26512-GB510B

10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.