NSN 5305-01-047-0481 · NIIN 010470481 · FSC 5305
NO DASHES 5305010470481
In Stock
SCREW,SHOULDER
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.441 AND INCHES MAXIMUM 0.508 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.889 AND INCHES MAXIMUM 0.936 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.461 AND INCHES MAXIMUM 0.507 |
| AATN | SHOULDER DIAMETER | FIRST SHOULDER INCHES MINIMUM 0.342 AND INCHES MAXIMUM 0.343 |
| AATX | SHOULDER LENGTH | FIRST SHOULDER INCHES MINIMUM 0.428 AND INCHES MAXIMUM 0.448 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CWYB | SHOULDER SHAPE | FIRST SHOULDER ROUND |
| FEAT | SPECIAL FEATURES | INTERNAL HEXAGON SOCKET 0.127 IN. MIN AND 0.130 IN. MAX WIDTH ACROSS FLATS,0.160 IN. DEEP IN THREAD END |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S5629 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| HT4011-5-7 | 56878 |
| 11919-5-7 | 59563 |
| HT4011-5-7 | 73197 |
| ST3M506-5-7 | 76301 |
| HT4011-5-7 | 80539 |
| HT4011-5-7 | 92215 |
| HT4011-5-7 | 97928 |
| 10429186 | A486G |
| HT4011-5-7 | L4528 |
| HT4011-5-7 | 06950 |
| HT4011-5-7 | 17446 |