NSN 5305-01-050-0502 · NIIN 010500502 · FSC 5305
NO DASHES 5305010500502
In Stock
SCREW,SHOULDER
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.306 AND INCHES MAXIMUM 0.356 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.191 AND INCHES MAXIMUM 1.221 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.338 AND INCHES MAXIMUM 0.381 |
| AATN | SHOULDER DIAMETER | FIRST SHOULDER INCHES MINIMUM 0.2021 AND INCHES MAXIMUM 0.2026 |
| AATX | SHOULDER LENGTH | FIRST SHOULDER INCHES MINIMUM 0.865 AND INCHES MAXIMUM 0.356 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CWYB | SHOULDER SHAPE | FIRST SHOULDER ROUND |
| FEAT | SPECIAL FEATURES | INTERNAL HEX ON THREADED END 0.0791 IN. TO 0.0806 IN. WIDE AND 0.115 IN. TO 0.135 IN. DEEP |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S5629 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
13 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| HT4008-3-14 | 56878 |
| WC40080-3-14 | 60516 |
| 11913-3-14 | 59563 |
| ST3M496-3-14 | 58998 |
| HT4008-3-14 | 73197 |
| ST3M496-3-14 | 76301 |
| HT4008-3-14 | 80539 |
| HT4008-3-14 | 92215 |
| HT4008-3-14 | 97928 |
| HT4008-3-14 | K5673 |
| HT4008-3-14 | L4528 |
| HT4008-3-14 | 06950 |
| HT4008-3-14 | 17446 |