NSN 5305-01-050-1510 · NIIN 010501510 · FSC 5305
NO DASHES 5305010501510
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.756 AND INCHES MAXIMUM 0.806 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.454 AND INCHES MAXIMUM 1.484 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.747 AND INCHES MAXIMUM 0.752 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.4990 AND INCHES MAXIMUM 0.4995 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.500 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.678 AND INCHES MAXIMUM 0.698 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| FEAT | SPECIAL FEATURES | DRY FILM LUBRICANT P.S. 18021 CL 1 |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 76301-ST3-466 |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 11909V8L11M1 | 59563 |
| HT4028L8-11M | 73197 |
| ST3M466V8L11M1 | 76301 |
| HT4028L8-11M | 80539 |
| ST3M466V8L11M1 | 92215 |
| HT4028L8-11M | 92215 |
| HT4028L8-11M | 97928 |
| HT4028L8-11M | L4528 |
| ST3M466V8L11M1 | K5673 |
| HT4028L8-11M | 06950 |
| HT4028L8-11M | 17446 |