NSN 5305-01-054-6268 · NIIN 010546268 · FSC 5305
NO DASHES 5305010546268
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.403 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.638 AND INCHES MAXIMUM 0.668 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.350 AND INCHES MAXIMUM 0.399 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2485 AND INCHES MAXIMUM 0.2495 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 46.0 AND ROCKWELL C MAXIMUM 49.0 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6487 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE NAS 672 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
12 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| PBF1166-4-4 | 27624 |
| C7985-4-4 | 56878 |
| 121558-4-A4P | 80539 |
| C7985-4-4 | 81755 |
| VT1694F4-4 | 92215 |
| 5305PL0759614 | 9009H |
| 5305PL1943342 | 9009H |
| 5305PL1943341 | 9009H |
| C7985-4-4 | 06950 |
| AIC985-4-4P | 06725 |
| AIC985-4-4 | 06725 |
| H185-4-4 | 17446 |