NSN 5305-01-054-6276 · NIIN 010546276 · FSC 5305
NO DASHES 5305010546276
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.476 AND INCHES MAXIMUM 0.526 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.048 AND INCHES MAXIMUM 1.078 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.429 AND INCHES MAXIMUM 0.479 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3110 AND INCHES MAXIMUM 0.3120 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.552 AND INCHES MAXIMUM 0.572 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 46.0 AND ROCKWELL C MAXIMUM 49.0 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6487 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE NAS 672 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
13 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| GS1009-5-9 | 1EM77 |
| PBF1166-5-9 | 27624 |
| 93926-5-9 | 56878 |
| 93926-5-9 | 80539 |
| 121558-5-A9P | 80539 |
| C7985-5-9 | 81755 |
| C20645-5-9 | 81755 |
| 5305PL1944973 | 9009H |
| VT1694F5-9 | 92215 |
| 5305PL0759621 | 9009H |
| AIC985-5-9P | 06725 |
| AIC618-5-9 | 06725 |
| AIC985-5-9 | 06725 |