NSN 5305-01-056-2158 · NIIN 010562158 · FSC 5305
NO DASHES 5305010562158
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.320 AND INCHES MAXIMUM 0.370 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.955 AND INCHES MAXIMUM 0.985 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.295 AND INCHES MAXIMUM 0.334 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1625 AND INCHES MAXIMUM 0.1635 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.164 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.615 AND INCHES MAXIMUM 0.635 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| MATT | MATERIAL | OVERALL STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 8740 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| BACB30LU2-10 | 27624 |
| BACB30LU2-10 | 56878 |
| BACB30LU2-10 | 57928 |
| BACB30LU2-10 | 81205 |
| BACB30LU2-10 | 92215 |
| BACB30LU2-10 | 9N513 |
| BACB30LU2-10 | 06710 |
| BACB30LU2-10 | 06725 |
| BACB30LU2-10 | 06950 |
| BACB30LU2-10 | 17943 |
Supersedes
This item replaces cancelled NIIN 010701692. An older drawing citing one of those numbers resolves here.