NSN 5305-01-057-0333 · NIIN 010570333 · FSC 5305
NO DASHES 5305010570333
In Stock
SCREW,CAP,HEXAGON HEAD
Screws
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.742 AND INCHES MAXIMUM 1.000 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.969 AND INCHES MAXIMUM 1.000 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.378 AND INCHES MAXIMUM 0.403 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.922 AND INCHES MAXIMUM 0.938 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.625 |
| CMLP | THREAD QUANTITY PER INCH | 11 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 120000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 25.0 AND ROCKWELL C MAXIMUM 34.0 |
| CRTL | CRITICALITY CODE JUSTIFICATION | ZZZX |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 63.0 |
| FEAT | SPECIAL FEATURES | MATERIAL GRADE 8 HAS A ROCKWELL HARDNESS C32 TO C38 AND A 150000 MIN. TENSILE STRENGTH |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE SAE,GR 5 OR 8 |
| SFTT | SURFACE TREATMENT | OVERALL PHOSPHATE MANGANESE |
| SPCL | SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL--16232,TY -,CL 2 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL--23199 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 2 AND STYLE 10 AND GRADE 5 AND GRADE 8 |
| ZZZW | DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY SURFACE FINISH |
| ZZZX | DEPARTURE FROM CITED DESIGNATOR | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS90725-158 | 80205 |
| FF-S-85 | 81348 |
| MS90725-158 | 96906 |