NSN 5305-01-062-1058 · NIIN 010621058 · FSC 5305
NO DASHES 5305010621058
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.445 AND INCHES MAXIMUM 0.495 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.267 AND INCHES MAXIMUM 1.297 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.510 AND INCHES MAXIMUM 0.566 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3735 AND INCHES MAXIMUM 0.3745 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.802 AND INCHES MAXIMUM 0.822 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| BACB30RF6P13 | 1RC86 |
| BACB30RF6P13 | 56878 |
| BACB30RF6P13 | 60516 |
| BACB30RF6P13 | 73197 |
| BACB30RF6P13 | 81205 |
| BACB30RF6P13 | 97928 |
| BACB30RF6P13 | 9N513 |
| BACB30RF6P13 | L4528 |
| BACB30RF6P13 | 06950 |
| BACB30RF6P13 | 06725 |
| BACB30RF6P13 | 17446 |