NSN 5305-01-062-3348 · NIIN 010623348 · FSC 5305
NO DASHES 5305010623348
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.429 AND INCHES MAXIMUM 0.479 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.939 AND INCHES MAXIMUM 2.969 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.428 AND INCHES MAXIMUM 0.479 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3110 AND INCHES MAXIMUM 0.3120 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 2.490 AND INCHES MAXIMUM 2.510 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| MATT | MATERIAL | OVERALL NICKEL ALLOY 718 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC 1ST TREATMENT RESPONSE QQ--416, TY2CL2 ALU-INU- IG-ENTED COATING |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
14 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| BACB30UW5P40 | 1RC86 |
| BACB30UW5P40 | 27624 |
| BACB30RF5P40 | 27624 |
| BACB30UW5P40 | 56878 |
| BACB30RF5P40 | 56878 |
| BACB30RF5P40 | 73197 |
| BACB30UW5P40 | 73197 |
| BACB30RF5P40 | 81205 |
| BACB30UW5P40 | 81205 |
| BACB30UW5P40 | 97928 |
| BACB30UW5P40 | L4528 |
| BACB30UW5P40 | 06950 |
| BACB30RF5P40 | 06950 |
| BACB30RF5P40 | 17446 |