NSN 5305-01-063-1731 · NIIN 010631731 · FSC 5305
NO DASHES 5305010631731
In Stock
SCREW,MACHINE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.314 AND INCHES MAXIMUM 0.364 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.574 AND INCHES MAXIMUM 0.604 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.294 AND INCHES MAXIMUM 0.332 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.164 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 40.0 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CYAU | SCREW MATERIAL | STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740 |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 2 |
| THSD | THREAD SERIES DESIGNATOR | UNJC |
| ZZZK | SPECIFICATION/STANDARD DATA | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 80205-NAS1221 |
Cross-references
14 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| NAS1221-08-4 | 30902 |
| NAS1221-08-4 | 56878 |
| NAS1221-08-4 | 58998 |
| NAS1221-08-4 | 73197 |
| NAS1221-08-4 | 80205 |
| NAS1221-08-4 | 80539 |
| NAS1221-08-4 | 92215 |
| NAS1221-08-4 | 97928 |
| 10114940 | A486G |
| NAS1221-08-4 | L4528 |
| NAS1221-08-4 | 04348 |
| NAS1221-08-4 | 08938 |
| NAS1221-08-4 | 07851 |
| NAS1221-08-4 | 17446 |
Supersedes
This item replaces cancelled NIIN 010326445. An older drawing citing one of those numbers resolves here.